Kinja'd!!! "MonkeePuzzle" (monkeypuzzle)
07/11/2019 at 17:58 • Filed to: RuqSaq, BaXeLFoley

Kinja'd!!!0 Kinja'd!!! 7
Kinja'd!!! Kinja'd!!!

DISCUSSION (7)


Kinja'd!!! benjrblant > MonkeePuzzle
07/11/2019 at 18:06

Kinja'd!!!0

nice .


Kinja'd!!! Svend > MonkeePuzzle
07/11/2019 at 18:08

Kinja'd!!!7

The nozzle needs adjusted at the front to get a fan rather than a jet.

If you look at the front of the nozzle you’ll see two blades, rotate the nozzle at the front clockwise and anti-clockwise and you’ll see those blades move closer together and then further apart.

You want the blades quite close together but not too close. Your aiming for about a six foot wide fan from about three-four feet away.

Also just over an inch of product in the bottle, with just over half a litre of water in the bottle is a good ratio for a snow foam or shampoo used as a snow foam. 


Kinja'd!!! For Sweden > MonkeePuzzle
07/11/2019 at 18:31

Kinja'd!!!0

Wait that’s illegal


Kinja'd!!! MonkeePuzzle > For Sweden
07/11/2019 at 20:56

Kinja'd!!!0

i’m just scum. we established this


Kinja'd!!! MonkeePuzzle > Svend
07/11/2019 at 20:58

Kinja'd!!!1

indeed, this was my first time actually bothering with my foamer. Oddly, I had pulled it out because the tree doc said to spray my tree down with some soapy dish soap to treat an aphid infestation  

I certainly thought, I need to  adjust this, but the engrish instructions did not offer kich help. thanks for the direction


Kinja'd!!! MonkeePuzzle > Svend
07/11/2019 at 21:40

Kinja'd!!!1

oh indeed, ok it all makes sense now. with your words and a re-review of the instructions, I can see now that the adjustment was just stuck and needed a little effort at first. but now it is loose and adjusting correctly

Kinja'd!!!


Kinja'd!!! Svend > MonkeePuzzle
07/11/2019 at 22:32

Kinja'd!!!0

No worries. The best sort of consistency of fo am you want on the car is between thick shaving foam and watery. Too thick and there won’t be sufficient water in the mix for the cleaner to penetrate the dirt and emulsify it, but too watery will cause the foam to just run off (like in the first picture) and offer no dwelling time for the cleaner to work.

Snow foams typically remove 90-95% of the dirt after a good pressure rinse and not a full replacement to a two bucket wash.

As with any product, don’t let it dry on the car. Either rinse it off and re-apply, or simply give it a quick blast with more product.

Just have fun with it. It really aids keeping the car clean and it's quite fun, especially looking at people faces of, 'what the hell is he doing?'. Lol.